金基利纳

   Inorganic fiber sprayed cottonAs a new type of thermal insulation, thermal insulation, noise reduction and sound absorption spraying product, special attention should be paid to the spraying method when spraying.
1. Before spraying inorganic fiber sprayed cotton, the builder needs to brush the adhesive or spray its aqueous solution on the basic surface, so it needs to wait until it fully penetrates into the basic layer before spraying;
    2、Inorganic Fiber Spray Cotton SprayConstruction must ensure the rhythm of fiber cotton mixing, need to be a stable rhythm.
3. The spraying thickness of inorganic fiber spraying cotton must be at least 60mm higher than the specified spraying thickness during spraying construction, which is to press down 8mm while embossing the spraying surface with a special pressing plate;
4, inorganic fiber spraying cotton spraying construction of various materials must be fully mixed state spraying;
5. The inorganic fiber spraying cotton shall be cleaned after spraying. The construction finishing personnel shall carefully remove the protective plastic sheets on the wall and ceiling, and pay attention to prevent the falling cotton from scattering when cleaning the protective cloth on the ground. Even the cotton remaining on the ground must be collected with tools, and the cleaning degree must reach the clean state before the construction;
6. The part of the inorganic fiber sprayed cotton needs to be smooth, that is to say, the pressing plate needs to be used for flattening and shaping before the fiber is cured;
7. After the inorganic fiber spraying cotton is finished, the nozzle must be cleaned carefully;
8, inorganic fiber spray cotton thermal insulation fiber spray coating should maintain good ventilation, dry maintenance, curing 72 hours after finishing, decoration and other processes;
    9、Inorganic Fiber Spray Cotton SprayAfter that, it is necessary to clean up the sprayed construction site in time and pack the rebound material into bags to clear the site.
shijiazhuang hongxiang insulation waterproof engineering co., ltd. is specializing in the production of shijiazhuang area inorganic fiber spraying cotton, mineral fiber cotton, superfine inorganic fiber spraying construction, as wellMineral fiber spraying constructionThe manufacturer is a professional company that has been committed to the research and development, production, sales and construction of thermal insulation (sound absorption) spraying for many years. The spraying series products developed by the company are A1 grade fireproof materials, which meet the national standards and can be purchased at ease.