金基利纳

Hebei Jinjilina insulation material Co., Ltd.是一家专业的Inorganic fiber spraying manufacturersInorganic fiber spraying is now widely used in the construction industry, and it is necessary to ensure the quality of engineering construction.
As a new type of engineering emerald green new coating-inorganic fiber spraying, has many advantages, such as sound insulation, heat insulation, fire safety, etc., in the specific practical application of inorganic fiber spraying, what operating specifications must be the most important attention?
Operation Specification 1: Before the construction of the project, the selection of materials can be sampled to carry out inspection to see whether the raw materials used conform to the construction regulations of the project, whether there are clumping, waste, etc. If there is any fading of layers, it should be immediately replaced.
Operation specification 2: it is to solve the surface of the object block to be painted, such as windows, doors, hanging parts, etc., before painting, it is necessary to clean up and tidy to ensure dust-free soil and firm installation of parts, otherwise it is necessary to carry out adjustment immediately.
Operating Specification 3: Prepare the previous things, and the next step is to configure the building paint. The configuration should be carried out strictly according to the required proportion. Too much water should not be added and the mixing time should be sufficient.
Operation Specification 4: In the end, it is natural to carry out the actual operation of painting. For the actual operation, people's online customer service can be consulted or the actual operation staff of engineering construction with technical specialty can undertake it.
In the case of raw materials for inorganic fiber spraying, the selection should be carried out according to the national industry standards, so that the quality of inorganic fiber spraying produced by the specified raw materials can be ensured. The second binder specification should also pay attention to, can not exceed the shelf life. After the processing of raw materials, it should be ensured that the temperature is always above zero in terms of environmental pollution, and the relative environmental humidity cannot exceed 85%. Before carrying out painting, attention should be paid to the cleaning of the rural grassroots. The surface layer should not have dirt such as dust and oil stains. This will endanger the actual effect of painting. Only after the approval of the testing staff can painting be carried out. To carry out engineering construction in accordance with the operating guidelines, raw materials should be equipped according to a certain proportion. Use with match at any time to prevent harm to the actual effect of spray paint binder. In the case of spray paint, the spray paint gun should be vertical to the rural base. In a certain distance, the actual effect of spray paint can be kept symmetrical. The inorganic fiber spray chemical raw materials can be kept in a certain amount to avoid looseness.