金基利纳

InInorganic fiber spraying constructionIn, many aspects need to be paid attention to, such as the quality inspection of raw materials, the treatment of the bottom surface, the preparation of materials, preparation, pre-spraying, etc. base layer, as well as fiber spraying. These points will be briefly introduced below.
Before construction, the appearance and quality of the raw materials used must be checked. For example, sprayed cotton fibers and adhesives for bonding can be examined by random selection of a small number of samples. The appearance and quality of inorganic fiber cotton must be dry, free of agglomeration and pollution, and the adhesive must not delaminate or fade, and there will be no quality problems. The sprayed bottom surface then needs to be treated. The dust on the base surface needs to be removed, the embedded parts must be strictly tested, and certain areas and parts that do not need to be sprayed should be shielded. The sprayed area should also be cleaned to ensure that the sprayed structure is not affected. After that, the inorganic fiber spraying material can be prepared, which should be prepared in strict accordance with the specified ratio, and it is best to use it. After preparation, spraying construction can be carried out. For information on how to spray inorganic fibers, please note for future updates.
With the remarkable enhancement of China's economic strength, urbanization has been gradually realized nationwide in recent years. New buildings and old houses as infrastructure have become the forerunners of the urbanization process. However, the utilization rate of energy-saving materials in buildings is low, and high-energy-consuming buildings are still a problem of continuous improvement in China. The use of new building insulation materials is a very effective means to solve the high energy consumption of traditional buildings, and building exterior wall insulation is an important part of building energy-saving system. It is of great value to improve building energy consumption and develop low-carbon energy-saving.