金基利纳

Inorganic fiber spraying is widely used, and its performance is better. In order to use inorganic fiber spraying, the better performance of inorganic fiber spraying. Inorganic fiber spraying, as a new type of environmental protection building coating, is widely used in fire protection of buildings and tunnels because of its light weight, odorless, sound absorption, good weather resistance, high-speed heat insulation, reliable fire resistance, and can achieve more than 5h high fire protection performance. Inorganic fiber spraying manufacturers remind you that when using inorganic fiber spraying, you need to pay attention to the following operation points.

Inorganic fiber spraying is widely used, and its performance is better. In order to use inorganic fiber spraying, the better performance of inorganic fiber spraying. Inorganic fiber spraying, as a new type of environmental protection building coating, is widely used in fire protection of buildings and tunnels because of its light weight, odorless, sound absorption, good weather resistance, high-speed heat insulation, reliable fire resistance, and can achieve more than 5h high fire protection performance.Inorganic fiber spraying manufacturersRemind you that when using inorganic fiber spraying, you need to pay attention to the following operation points.

Before spraying, the spraying equipment should be debugged, and the use of parts should be adjusted in strict accordance with the equipment operation instructions until the spraying state is stable. At the same time, various pipelines, air ducts and other equipment hangers should be installed to avoid drilling and chiseling on the base surface after spraying. Place thickness scale in sections and spray. Attention should be paid to the spraying angle. If the spraying thickness is less than 100mm thick, it can be sprayed at one time. Spray coat surface finish. After the surface of the spray coating is dry for a period of time, the surface of the spray coating is finished with tools such as pressure plate or alloy bar ruler. When the spray coating is damaged due to collision, local repair shall be carried out. For the parts that are often vulnerable to mechanical collision, glass fiber cloth or other protective materials can be pasted to protect the surface of the fiber layer. After finishing, spray adhesive on the finished surface. If the surface needs to be colored, the coloring paste can be sprayed after the adhesive is sprayed. Special attention should be paid to avoid mechanical collision and rain erosion during drying and curing of the finished product. After the completion of spraying, clean up the spraying site in time and clean up the waste.

Inorganic fiber spraying is a new type of environmental protection building coating, mainly composed of inorganic fiber and water-based adhesive, after mixing through the air pressure pump spraying, and atomized water mixed to the need to protect the substrate to form a coating. The coating can meet the requirements of sound absorption, heat preservation and fire protection. This material is light, tasteless, sound absorption, good weather resistance, heat insulation, fire resistance and reliable, can achieve more than 5h high fire protection. It is applicable to the fire protection of buildings and tunnels, the fire protection of high-rise steel structures with high fire resistance limit requirements, and also applies to the insulation and sound absorption of buildings and the insulation and energy saving of mechanical equipment.