金基利纳

Excellent thermal insulation performance

Mineral fiber spraying product is a kind of thermal insulation material with high thermal insulation value. After testing, the thermal insulation coefficient can reach 0.035~0.042 W/m.℃, which ensures excellent thermal insulation performance, especially when spraying on the surface of complex structure or special-shaped structure, it is closely bonded with the substrate, so that the thermal insulation layer forms a closed whole without joints, effectively blocking the cold and hot bridges and improving the thermal insulation effect, it fundamentally solves the problems of traditional thermal insulation materials such as many joints, poor bonding with the substrate, easy to fall off, and easy to deform.

Excellent sound absorption and noise reduction, damping and sound insulation performance

Sound absorption performance

After the mineral fiber spraying product is constructed by special spraying process, its internal fibers are intertwined to form an extremely complex three-dimensional network structure with certain strength and toughness, which greatly prolongs the propagation path and time of sound waves in its internal, and further increases the conversion time of sound energy to mechanical energy caused by the vibration of the fiber caused by sound waves, so that the sound wave energy encountered in the fiber spraying layer is rapidly attenuated, the mineral fiber sprayed product thus exhibits excellent sound absorption properties.

damping noise reduction performance

The sound absorption layer formed by the mineral fiber spraying product closely bonded to the metal surface layer effectively changes the vibration frequency of the steel plate, thereby improving the overall sound insulation capacity. At the same time, it can effectively cover the joints of the metal roof, avoid the defects such as sound leakage of the metal structure, and greatly improve the low-frequency sound insulation performance and rainfall noise performance of the metal roof. This function principle has achieved good results in the application of rainfall noise on the roof of the National Stadium.

Super fireproof performance

Mineral fiber cotton is made of inorganic materials such as ore, which belongs to inorganic non-combustible products. After testing, it does not burn, does not smoke, and does not support combustion. The national fire testing standards GB8624-2012 "building materials and products combustion performance classification" for the detection of A1 class non-combustible products.

Safe and environmentally friendly performance Mineral fiber spraying products are composed of environmentally friendly inorganic fiber cotton and water-based adhesives. They have been tracked and tested by the American and Canadian Health Associations and Cancer Associations for many years and are fully in line with World Health Organization health standards.

Mineral fiber spraying products have been tested by the "Environmental and Health-related Product Safety Institute of the Chinese Center for Disease Control and Prevention" and are in full compliance with the "Chemical Testing Guidelines" of the State Environmental Protection Agency.

The mineral fiber spraying products have been tested by the national "Limit of Harmful Substances in Adhesives for Interior Decoration Materials" GB18583-2008 standard, and fully meet the standards, and meet the relevant indicators of the "Green Olympic Product Guide.

Mineral fiber spraying products through a number of China, Europe and the United States, Japan and other national authority certification, is a class a non combustible material. It does not decompose at high temperature. No toxic gases and toxic substances, non-toxic and tasteless.

Mineral fiber spraying products for inorganic products, antibacterial, non-mildew, environmental health.

The waste of mineral fiber spraying products in spraying construction can be 100% recovered and recycled.