金基利纳

Inorganic fiber spraying construction details: At present, I have been exterior wall insulation materials mainly include rubber board, rock wool, glass wool, and polyurethane foam, and a new type of insulation technology, inorganic fiber spraying construction is one of the materials with low thermal conductivity and good thermal insulation effect. It has excellent performance of light weight, moisture-proof and heat insulation, and good weather resistance. Moreover, the fire prevention grade of the material reaches Grade A, which fully meets the fire prevention index of thermal insulation materials required by light body materials in modern buildings. In addition, the superfine inorganic fiber spraying material also has excellent sound absorption performance and is an excellent material for heat insulation and sound absorption of conference rooms, computer rooms and even mechanical equipment. At present, inorganic fiber spraying

Inorganic fiber spraying construction details: At present, I have been exterior wall insulation materials mainly include rubber board, rock wool, glass wool, and polyurethane foam, and a new type of insulation technology, inorganic fiber spraying construction is one of the materials with low thermal conductivity and good thermal insulation effect. It has excellent performance of light weight, moisture-proof and heat insulation, and good weather resistance. Moreover, the fire prevention grade of the material reaches Grade A, which fully meets the fire prevention index of thermal insulation materials required by light body materials in modern buildings. In addition, the superfine inorganic fiber spraying material also has excellent sound absorption performance and is an excellent material for heat insulation and sound absorption of conference rooms, computer rooms and even mechanical equipment. At present, the inorganic fiber spraying construction is being paid attention to and widely used by the performance, which has a significant effect on the reduction of building energy consumption, and the application prospect is very promising.

At the same time, as early as 2008, the inorganic fiber spraying construction was promoted as a substitute for traditional building thermal insulation materials, which further contributed to the development of ultra-fine inorganic fiber spraying technology. Inorganic fiber spraying energy-saving building materials will have greater and better development potential, and the market prospect is very broad.

Inorganic fiber spraying construction need to pay attention to some of the operating points. 1. Check and check the drawings to determine the correct spraying parts of the fibers, and mark and isolate the parts that do not need spraying. 2. Before spraying, the spraying equipment should be adjusted, and the use of parts should be adjusted strictly according to the operation instructions of the equipment, until the spraying state is stable. 3. Place the thickness scale in different areas, and then spray. Attention should be paid to the spraying angle. If the spraying thickness is less than 100mm thick, it can be sprayed at one time. 4. Inorganic fiber spraying construction spraying layer surface shaping. After the surface of the spray coating is dry for a period of time, the surface of the spray coating is reshaped with tools such as pressure plate or alloy bar ruler. 5. After the construction of inorganic fiber spraying and shaping, the surface after shaping is sprayed with binder. If the surface needs to be colored, the coloring paste can be sprayed after the adhesive is sprayed. 6. After the spraying is completed, clean up the spraying site in time and clean up the waste.