金基利纳

inorganic fiber sprayingYesThrough the special equipment, the ordinary inorganic fiber for special process treatment, the use of high-pressure fan through the pipeline to the nozzle of the special equipment, and the special adhesive inorganic fiber spraying special glue mixed to the substrate surface, in order to form a layer of uniform without seams, after drying has a certain hardness and bonding strength and decorative effect of multifunctional insulation coating. It can meet the requirements of sound absorption, heat preservation and fire protection.

Inorganic fiber and decorative effect, the surface can be treated with different colors, can be used in combination with other materials, increase the appearance and decorative effect. Inorganic fiber mainly adopts spraying construction, which is suitable for any complex and special structure surface, and can be directly sprayed on the surface of steel, concrete, glass and other materials.

inorganic fiber sprayingThe overall process flow includes four parts: pre-spraying, spraying construction, shaping and cleaning of the base..

1,Pre-spraying of base: before spraying cotton and adhesive, the base surface should be pre-sprayed with the prepared spraying adhesive, and the initial laying brings convenience to the following spraying.

2、Spraying construction: spray to a predetermined thickness at one time as required; if the thickness cannot be met, make-up spray must be carried out.

3,Shaping: shaping the sprayed fiber cotton layer with a special pressing plate or roller; it should be pressed to the design thickness.(Thickness can be measured using a special nail plate or a needle ruler)and make the surface flat.

4、Cleaning: cleaning of rebound materials on site; removal of protective and shielding materials; finished products of working surfaceThe wipe clean.

  Finally, after the finished product is completed, it should be protected, and full-time personnel should be set up to inspect the site at any time to prevent cross construction and avoid rework. Because there is a small amount of fiber cotton rebound in spraying construction, in order to prevent pollution to other finished products, decorative surface, mechanical equipment in the room, pipes, etc., protective measures must be taken. For equipment on the ground, decorative ground, other finished products can be covered with striped cloth. For wall decorations, small pendants, etc. can be hung from top to bottom on the wall for shielding protection.

Hebei Jinjilina insulation material Co., Ltd. mature“Technology leads the market, products serve the community”The idea,“Develop in competition and surpass in development”For China's energy conservation and environmental protection to shoulder the responsibility of the enterprise. If you are preparing for construction, you can contact.