金基利纳

The ultra-fine inorganic fiber cotton and fiber spraying special binder through a complete set of professional spraying equipment, after the nozzle port is fully mixed, with a certain pressure evenly sprayed on the top surface of the non-heating room, forming a certain thickness of heat preservation, sound absorption layer process, referred to as inorganic fiber spraying. After natural drying, the formation of a closed, seamless, overall stability, elastic skin-type insulation, sound absorption layer. After spraying, the surface is smooth, the fiber is evenly distributed, and there are no defects such as delamination, holes and cracks that affect the use. At the same time, it has three functions of energy saving and heat preservation, sound absorption and noise reduction, and fire prevention. Inorganic fiber spraying layer is divided into soft inorganic fiber

The ultra-fine inorganic fiber cotton and fiber spraying special binder through a complete set of professional spraying equipment, after the nozzle port is fully mixed, with a certain pressure evenly sprayed on the top surface of the non-heating room, forming a certain thickness of heat preservation, sound absorption layer process, referred to as inorganic fiber spraying. After natural drying, the formation of a closed, seamless, overall stability, elastic skin-type insulation, sound absorption layer. After spraying, the surface is smooth, the fiber is evenly distributed, and there are no defects such as delamination, holes and cracks that affect the use. At the same time, it has three functions of energy saving and heat preservation, sound absorption and noise reduction, and fire prevention. Inorganic fiber spraying layer is divided into soft inorganic fiber spraying layer and hard inorganic fiber spraying layer.

The characteristics of the underground garage are: the upper and lower sides of the roof of the underground garage are heating area and non-heating area respectively. The temperature difference in winter heating season is large. The adjacent floor slab of the upper and lower areas and the shear wall, column, beam and other parts connected with it form a heat flow intensive area. The heat is lost to the underground garage from the upper floor. The heat loss is very serious. In the new "Public Building Energy Efficiency Design Standard" and "Residential Building Energy Efficiency Design Standard", the heat transfer coefficient is also required to be no more than 1.5 W/m.K and 0.55 W/m.K. The underground garage is a gathering area of various pipeline facilities, and the beams and columns are scattered, which makes the installation of thermal insulation materials difficult. The underground garage is also a vehicle storage place, requiring the combustion performance of insulation materials for A- class non-combustible materials.

After spraying inorganic fiber, it fundamentally solves the problems of traditional materials (rock wool, polystyrene board, glass wool felt and other profiles) such as poor tightness, many joints, inability to fully stick to the base wall, complex installation process, easy aging, deformation and the like. The new inorganic fiber spraying technology can better solve the energy loss, reduce the operating cost, and improve the overall thermal insulation performance of the building to a greater extent.