金基利纳

Four characteristics of 1. inorganic fiber spraying. 1. Insulation Ultrafine inorganic fiber spraying is a kind of energy-saving thermal insulation material with high thermal insulation performance. Thermal conductivity λ = 0.038 W/m · K. In Class A non-combustible thermal insulation materials, the thermal insulation performance is in the forefront of many building thermal insulation materials.

Four characteristics of 1. inorganic fiber spraying.

1. Insulation

Ultrafine inorganic fiber spraying is a kind of energy-saving thermal insulation material with high thermal insulation performance. Thermal conductivity λ = 0.038 W/m · K. In Class A non-combustible thermal insulation materials, the thermal insulation performance is in the forefront of many building thermal insulation materials.


2. The whole seamless

The thermal insulation layer sprayed with ultra-fine inorganic fibers forms a skin-like whole, which is airtight and has no seams, which effectively blocks the thermal bridge, and fundamentally solves the problem that the traditional thermal insulation profile has many seams and is easy to fall off. And deformation, and can not be firmly adhered to the substrate and other issues, greatly improving the insulation effect of the building envelope.


3. Not combustible (Class A fire prevention)

Most of the components of ultra-fine inorganic fiber spray coatings are inorganic substances. After testing, they are non-combustible, non-smoky, and are Class A non-combustible materials. This function fully meets the fire protection requirements of the Code for Fire Protection Design of Garages, Maintenance Garages and Parking Lots (GB50067-97). This extraordinary feature makes up for the lack of other materials.


Adaptability of complex structures

The ultra-fine inorganic fiber spraying can be directly sprayed on any medium such as steel structure, concrete, etc., and the high-efficiency mechanical automatic construction operation can be used in any complex (special-shaped) structure or pipeline, hanging parts, dense area, and even if the construction personnel are difficult to reach, it can be easily sprayed in the space for construction. It fully demonstrates the plasticity and complete air tightness of its products, and greatly improves the heat insulation and sound absorption effects of fiber spraying.


Application of 2. Inorganic Fiber Spraying on Ceiling


1. Fireproof thermal insulation ceiling for basement and underground garage

The upper and lower sides of the roof of the underground garage are heating and non-heating areas. The temperature difference in the winter heating season is large, and the heat is lost from the upper occupant to the underground garage, and the heat loss is very serious. The underground garage is a distribution center for various pipeline facilities, with scattered beams and columns, which makes the installation of insulation materials difficult. The underground garage is also a storage place for vehicles, and the combustion performance of insulating materials is required to be Class A non-combustible materials.


2. Application of large public building ceilings

It is used for indoor ceilings in large public buildings and villas such as museums, convention and exhibition centres, stadiums and theaters. According to the design requirements of the indoor roof of the building, a special spraying solution was developed to meet the national standard of fire protection A. It also has excellent comprehensive properties, such as heat preservation and heat insulation, sound absorption and noise reduction, without suspension parts, supports, etc. The construction difficulty is reduced and the cost is saved.