金基利纳

The first is the erection of scaffolding. I believe that everyone involved in this project understands the construction process of inorganic fiber spraying. Let's talk about scaffolding. According to the actual situation on site, since the floor height is only 4 meters, only 2 meters of scaffolding is enough. The fiber spraying structure adopts movable scaffolding. Specific construction methods:

The first is the erection of scaffolding. I believe that everyone involved in this project understands the construction process of inorganic fiber spraying. Let's talk about scaffolding. According to the actual situation on site, since the floor height is only 4 meters, only 2 meters of scaffolding is enough. The fiber spraying structure adopts movable scaffolding. Specific construction methods:


Preparation of inorganic fiber spraying construction before 1. spraying, spraying substrate surface treatment:

1) If the foundation has obvious roughness, it needs to be trimmed to the extent that it does not affect the spraying operation.

2) Remove debris: remove unnecessary nails, bolts, steel bars, etc. on the foundation surface. Remove surface materials with poor water resistance, such as water-based paint.

3) In principle, after the completion of the construction of the spreader of the pipeline, pipeline, wiring and other lines, the opening of the pipeline and the wooden frame around the opening, the construction equipment engineering should be carried out before the installation of auxiliary equipment.


Preparation for 2. Inorganic Fiber Spraying

1) Check and check the drawings to determine the parts and non-sprayed parts of the inorganic fiber spraying structure;

2) Set up spraying machinery, adjust and check the spraying host to maintain stable and stable operation;

3) Adjust and check the spray pump, keep the pressure stable and even, debug the main engine and the liquid pump system together, and carry out part of the trial spray.


The process flow of 3. inorganic fiber spraying construction is to pre-spray the substrate-spray construction-shaping-cleaning.

1) Pre-spraying of the substrate: coat the surface of the substrate with adhesive or spray its (glue) aqueous solution, and spray after the substrate has completely penetrated.

2) Inorganic fiber spraying structure: spray to a predetermined thickness at a time as required.

3) Forming after inorganic fiber spraying construction: Use a special pressure plate to process (form) the surface, and then spray it with adhesive and glue.

4) Cleaning: clean up the rebound material on site; remove the protective shielding material; wipe and clean the finished work surface.