金基利纳

Inorganic fiber spraying is widely used and its performance is very good. In order to play a better inorganic fiber spraying performance when using inorganic fiber spraying. Inorganic fiber spraying as a new type of environmental protection building coatings, because of its light weight, non-toxic, tasteless, sound absorption, good weather resistance, good heat insulation effect, fire performance and reliable advantages are widely used in the field of construction. Can reach more than 5 hours of high fire protection performance. Fire protection of buildings and tunnels.

Inorganic fiber spraying is widely used and its performance is very good. In order to play a better inorganic fiber spraying performance when using inorganic fiber spraying. Inorganic fiber spraying as a new type of environmental protection building coatings, because of its light weight, non-toxic, tasteless, sound absorption, good weather resistance, good heat insulation effect, fire performance and reliable advantages are widely used in the field of construction. Can reach more than 5 hours of high fire protection performance. Fire protection of buildings and tunnels.
 

Before spraying, the spraying equipment should be debugged, and the use of parts should be adjusted in strict accordance with the equipment operation manual until the spraying state is stable. At the same time, various pipes, air ducts and other equipment hangers should be installed to avoid drilling and chiseling on the base surface after spraying. Position thickness scale in area and spray. Pay attention to the spray angle. If the spraying thickness is less than 100mm, it can be sprayed at one time. Spray surface molding. After the surface of the spray coating is dry for a period of time, please use a tool such as a pressure plate or an alloy ruler to shape the surface of the spray coating. When the spray coating is locally damaged due to collision, local repair should be carried out. For parts that are often prone to mechanical collisions, glass fiber cloth or other protective materials can be pasted to protect the surface of the fiber layer. After reshaping, an adhesive coating is sprayed on the reshaped surface. If you need to color the surface, you can spray the color paste to color after spraying the adhesive. Special attention should be paid to the sprayed product during drying and curing to avoid mechanical impact and rain erosion. After spraying, the spraying site should be cleaned in time to clean up the waste.
 

Inorganic fiber spraying is a new type of environmental protection architectural coating, which is mainly composed of inorganic fiber and water-based adhesive. After mixing, it is sprayed through an air pump, mixed with atomized water and sprayed on the substrate to be protected to form a coating. The coating can meet the requirements of sound absorption, heat preservation and fire prevention. The material is light in weight, non-toxic and tasteless, sound absorption, weather resistance, heat insulation and reliable fire resistance, and can achieve high fire protection for more than 5 hours. Suitable for fire protection of buildings and tunnels. It is also suitable for fire protection of high-rise steel structures with high fire protection requirements. It is also suitable for heat insulation and sound absorption of buildings, as well as heat preservation and energy saving of mechanical equipment.